2017年8月18日星期五

electric power fittings factory

electric power fittings factory features:
(1)ADSS suspension clamp has greater interface with ADSS cables. Stress is distributed equally without stress focus. ADSS suspension clamp can protect optical cables very well and can improve the intensity of cable line installation point.
(2)ADSS suspension clamp has higher supporting capability of dynamic stress. The ADSS suspension clamp can supply enough grip strength (10%RTS)in order to ensure the safety of ADSS cables under imbalanced load for long time.
electric power fittings factory
(3)The gentle rubber clamp pieces improve self-damping and reduce abrasion.
(4)The smooth shape of the ends improve the discharging voltage and reduce the loss of electric power.
(5)The superior aluminum alloy materials have higher comprehensive mechanical performance and corrosion resisting capability, which extends the lifetime usage.
ADSS suspension clamp standard compliance:
DL/T767-2003 preformed helical fittings for ADSS

http://www.preformedfittings.com/product/Electric-power-fittings/

Preformed Line Products

Shijiazhuang Paerpu Import and Export Trading Co.,Ltd. is the subsidiary of Hebei Boersen Photoelectric Equipment Technology Co.,Ltd. Mainly engaged in sale and export products.
Preformed Line Products Main Features:
Suitable pouches: Various All kinds of preformed special shaped pouches
Shaped sealing: Sealing the shaped bags according to the special shape.
Easy to operate: PLC controller, HMI system, fault indication on the touch screen.
Easy to adjust: Only about 10 minutes to change different pouches.
Frequency control: Speed can be adjusted by frequency conversion within the range.
High Automation: Unmanned in weighing and packing process, machine alarm automatically when failure.
Preformed Line Products
Safety and Hygiene:
No pouch/ incorrect pouch opening-no fill-no seal, machine alarm.
Machine alarm and stop when the inadequate air pressure.
Safety guards with safety-switches, machine alarm and stop when the safety guards are opened.
Hygienic construction, the product contact parts are adopted SUS304 stainless steel.
Imported engineering plastic bearings, no need to oil, no contamination.
Oil-free vacuum pump, avoid the pollution of the production environmental.

OPGW&ADSS strain assembly

Do you want to know OPGW&ADSS strain assembly? Hebei Boersen Photoelectric Equipment Technology Co.,Ltd. is a professional new technology enterprise which develop, exploit, manufacture and sale Preformed tension clamp/armor rods equipment, Preformed ADSS & OPGW Cable, Preformed Products for Transmission & Distribution and electrified railway fittings.
OPGW&ADSS strain assembly
The advantage of part of the OPGW&ADSS strain assembly:
1. Stress is distributed equally, without stress focus. It can protect optical cabl-es very well.
2. Under the condition of not exceeding the intensity of cable's side pressure, it has higher grip power for the cable, and can support higher tensile force.
3. The grip power for the cable is not less than 95% of rating's pulling resisting intensityof the optical cable, completely satisfying the needs of setting up the cable
Welcome to our website to learn more product's information.

http://www.preformedfittings.com/product/ADSS-and-OPGW-cable/

preformed guy grip

preformed guy grip-Preformed dead end grip has many types; it is normally used as assembly of transmission line bare conductor and covered conductors. It can replace the current bolt type clamps and compression type deadend strain clamp. Preformed tension clamp is usually made of aluminum clad steel, aluminum alloy, copper covered steel and galvalnized steel. Preformed deadend grip has firm preformed parts and can provide enough grip strength to ACSR, AAC, AAAC, copper conductor and steel wire and have bigger suitable conductor size. 
According to function and applicable area, it can be devided into:

Preformed conductor tension clamps/deadend grip
Preformed grounding wire tension clamp/deadend grip
Preformed guy wire tension clamp / deadend grip / guy grip deadend clamp / pole top make off

Normally the preformed tension clamps will be assembled with thimble, thimble clavis, adjustable stay rod, adjustable guy clamp and insulators.

2017年7月26日星期三

preformed dead end grip

preformed dead end grip preformed dead end guy grip used for adss/opgw cable fitting clamp
PREFOMED GUY GRIPS Dead-ends are of supreme effeciency for the securing guy strand. the uniqueness of the design is neat and provides a better function to avoid bolts or high-stress-holding devices. At the same time, its perfect durability, easier tensioning and good adaptability are well-developed. GUY-GRIP Dead-ends are made of the same material as the strand to which they are applied, which means they are of high strength and with the remarkable strait of anti-corrosion.
preformed dead end grip

Type
Cable dIameter (mm)
Length of Dead end component (mm)
ANL015/0950
9.0-9.5
800
ANL015/1050
9.6-10.5
850
ANL015/1160
10.6-11.6
910
ANL015/1280
11.7-12.8
960
ANL015/1410
12.9-14.1
1080
ANL015/1560
14.2-15.6
1160
ANL015/1700
15.7-17.0
1160

For more information,pls http://www.preformedfittings.com/Product/

2017年7月21日星期五

Stainless Steel Conveyor Belt for sale

stainless steel conveyor belt are made of stainless steel wire of spring wire. Wire diameters varies from 0,9 to 3.2mm. Pitches from 4 mm until 22.23mm, and belt widths from 10 mm until 3 meter. We a big range of standard dimensions, but can make all the (non standard) dimensions too because of the multi adjustable production machinery. Belts executed with single loop (most common) or double looped edges for special occasions.
Stainless Steel Conveyor Belt


304 stainless steel wire mesh for sale

We are one of professional top ten China 304 stainless steel wire mesh manufacturers.304 stainless steel mesh is a very useful screen type, 304 stainless steel wire mesh for acid and alkali conditions, screening and filtration, oil industry for the mud network, chemical fiber industry for the screen, the electroplating industry for pickling network.
304 stainless steel wire mesh