Where to find quality preformed cable fittings products

Where to find quality preformed cable fittings products? Welcome to visit Shijiazhuang Paerpu Import and Export Trading Co.,Ltd, which is specialized in developing and exporting preformed cable fittings for ADSS&OPGW, such as dead end guy grip, armor rods, tension clamp etc. We put quality and customer service in our first priority.

Dead end guy grip明

Specification
1. Material：steel ,aluminum,copper
2. Surface Finish：hot dip galvanized,uniform and smooth
3. Application：cable,suspension,line hardware
4. Standard：ISO9001

Features
1.Good wear-resistance,no deformation,long life cycle and so on.
2.We are an OEM supplier specializing in varous casting,forgings and machining
3.The quality of our products have all passed the international standards.
4.The products are exported to Asia, Europe, Africa, the United States and other countries

For more information, please visit http://www.preformedfittings.com/About/

Reliable china overhead lines fittings manufacturers

Dead end preformed tension clamp from Shijiazhuang Paerpu Import and Export Trading Co.,Ltd, which is the reliable china overhead lines fittings manufacturers. With the complete set of independent development,exploitation,high efficient,high quality preformed fittings production equipment, we are looking forward to cooperating with customers all over the world.

preformed fiber optic cable fitting

Dead end preformed fiber optic cable fitting component
1. U-Anchor shackle: Hot-dig galvanized steel
2. Paraller plate: Hot-dig galvanized steel
3. Clevis Thimble: Hot-dig galvanized steel
4. Outer armour rods: Aluminum clad steel
5. Inner reinforcing armour rods: Aluminum clad steel
6. Parallel groove clamp: Aluminum Alloy
7. Earth bonding laed: Aluminum

OPGW Tension Clamp Order Notice
1. Choose the suitable suspension clamp according to the outer diameter of OPGW cable and RTS.Suitable for long span river,high span valley etc. special place.
2. the quantity configuration : 1 set / terminal line tower,2 sets/strain pole tower
3. the turning direction of inner preformed wire different from the outer ones, the standard configuration is turning right, if turning left,please note it in the contract.
4. suggest to use one time after the clamp afford full strain
5. clamp strength:70KN,100KN,120KN,160KN,210KN,250KN,300KN etc.

For more information,please visit http://www.preformedfittings.com/About/

Strain Clamp supplier

Are you looking for the strain clamp supplier of china?
FAQ:

Q1: How is the Design & Engineering
 A: Experienced and skilled team of designers including CAD designers and 3D designers has the capacity to deliver outstanding designs for your project.
     If you require more complex engineering of structures such as overhead transmission and distribution lines design,we can also provide this service also designer fee.
 
Q2: What's the payment term?
 A: We accept T/T, L/C, West Union, Cash.
 
Q3: What's the delivery time?
 A: Usually 2-4 weeks. Or according to quantities 
 
Q4: What's the standard of package?
 A: Export standard package or special package as the requirement of customers.

Strain Clamp supplier

OPGW&ADSS Tension set usage

Bosen  produce the OPGW&ADSS Tension set  used to connect ADSS/OPGW cables and tensile poles(or towers). Aluminium clad steel rods can protect and provide cushioning to the ADSS/OPGW cables. The special design of helical rods makes ensure that tension sets can not cause undue stress to the ADSS/OPGW cables so that the normal lifetime of cable system is ensured.

OPGW&ADSS Tension set 

Specification
Inner Armor Rod:1800mm
Cable diameter:11.0-11.8mm
Outer Armor Rod:1300mm
Clevis Thimble:LH-1000
Extension link:PD-7
Anchor Shackle:U-7


Advantage:
1.Stress can be distributed equally among the ADSS/OPGW cable surface without stress centralization to protect ADSS/OPGW cable.
2.It has higher grip strength for the cable and can support higher tensile force when stress doesn't exceed the optical cable's side strength.
3.The grip strength for the cable is not less than 95% rated tension strength(RTS),of the optical cable,fully suitable for the installation of ADSS/OPGW cable.
4.The surface and the smooth shaped of end improve the discharging voltage and reduce the loss of electric power.
5.The superior aluminum alloy material has higher comprehensive mechanical performence and cauterization resisting capability,and extends the lifetime usage.
6.Easy installation, no need for special tools, no need for maintenance.


For more information, please visit http://www.preformedfittings.com/About/

preformed fittings china

Suspension clamps/ ADSS Fittings/ Preformed fittings/ Cable Transmission Line Fittings

Detailed Description

Product Name: suspenion clamp 

Model: AXC

Max. Span length: 200m

RTS: 20KN

Manufaturer of various electrical preformed fittings

We are manufaturer of various electrical preformed fittings ,such as the preformed armor rods, which is used to keep the conductor from the vibration, clamp compressive stress, friction and abrasion, electric arc and other damages. The structure of the preformed armor rods andpreformed short armor rods is simple and a set of preformed rods become an empty pipe and enlace, holdand protect the conductor.he armor rods can protect the optical cable by preventing the vibration damper aluminum clamp from nipping directly onto the OPGW cables to cause damages of the cable.

More information ,please visit:http://www.preformedfittings.com/html/Manufaturer-of-various-electrical-preformed-fittings-1533.html

overhead lines equipment factory

Shijiazhuang Paerpu Import and Export Trading Co.,Ltd. is the subsidiary of Hebei Boersen Photoelectric Equipment Technology Co.,Ltd. Mainly engaged in sale and export products. Hebei Boersen Photoelectric Equipment Technology Co.,Ltd. is a professional new technology enterprise which develop, exploit, manufacture and sale overhead lines equipment, Preformed ADSS & OPGW Cable, Preformed Products for Transmission & Distribution and electrified railway fittings. 

Description of Preformed Armor Rods Forming Machine

1. Suitable for processing the preformed strain clamp ,preformed suspension clamp and the preformed protection  fittings (material:the aluminum clad steel wire or galvanized steel wire)

2. Forming speed: 0-1.5m/s , Diameter: 1.67-5.2mm（the aluminum clad steel wire or galvanized steel wire), 1.78-9.27mm（aluminum alloy wire）

3. One group of product length tolerance range:±2mm

4. Three kinds of feed tray selection, can be designed according to user requirements

5. Equipment controlled by PLC

Vibration Dampers from telecommunication accessories manufacturers

The OPGW Vibration Dampers which is one kind of telecommunication accessories. It is used to lessen fatigue damage of breeze to wire. So there must be reasonable weight and installation location. When dampers slip, this can harm wire more seriously.This kind of anit-slip hippocampus damper that produced by our company has special weight and reasonable shape design.we are the prefessional telecommunication accessories manufacturers in china, any of your OEM requirement, please feel free to contact us.

 OPGW Vibration Dampers

Function and characteristics of Vibration Dampers
It can produce several resonance frequencies and it can also absorb vibration of variable frequencies effectively.  The patent installation with pre-twisted armor rods can ensure large bond area and evenly-
distributed adhesive force so that there’s no stress concentration and the constant installation torque can be stayed. Therefore, the product can not slip. This can avoid fatigue damage of wire effectively and lengthen service life of lin.

Installation method:
This product is installed by pretwisted wire; make sure that the wire type is coincident with matched installation pre-twisted wire before installation.
1. Hang the damper clamp on the designed installation distance location.
2. Take out one pre-twisted wire out of the three ones and align the central signs to the groove on damper clamp, then wrap the pre-twisted wire around wire.
3. Repeat step two and finish the rest two pretwisted wires wrapped around wire and make sure the central signs align.

For more information, please visit http://www.preformedfittings.com/

What is Preformed fittings

What is Preformed fittings? The preformed fittings are widely used in electrical industry to link OPGW&ADSS cables, Shijiazhuang Paerpu Import and Export Trading Co.,Ltd is one of the leading supplier in the North of china.We are the  export subsidiary of Hebei Boersen Photoelectric Equipment Technology Co.,Ltd, which is the high tech enterprise to manufacture and sell all kinds of preformed fittings and it's equipment. The dead end tension clamp is one type of the comment preformed fittings, we can design according to customer's request, welcome to let us know your demand.

preformed dead end tension clamp

Product description
The preformed dead end tension clamp is intended for turning angle, continuing and terminal connecting. The helical aluminum-clad steel rod has strong tensile strength, no concentrative stress, plays a role to protect cable and assist reducing vibration. The whole set of cable tension hardware contains preformed rod, matching connection hardware. The holding strength of clamp is no less than 95% of rated tensile strength, quick and easy to install, cut construction cost, suitable for a span<100m.


Product features
1. High Strength: Each conductor Tension clamp has an extra holding length, which can ensure the tensile strength reach over 100% of rating tensile strength
2. Good corrosion Resistance: The material is same as conductors, which ensures a strong corrosion resistance.
3. Simple Installation: The Helical conductor Tension clamp can be installed rapidly and easily at sit manually, needn’t any special tool. It can be completed by one worker.
4. Easy to Ensure Installation Quality: With well consistence, the conductor clamp wouldn’t damage conductor during installation, which can be check by eyes, with com.

For more information, please visit http://www.preformedfittings.com/

optical cable China manufacturer

Hebei Boersen Photoelectric Equipment Technology Co.,Ltd. is a professional optical cable China manufacturer which develop, exploit, manufacture and sale Preformed tension clamp/armor rods equipment, Preformed ADSS & OPGW Cable, Preformed Products for Transmission & Distribution and electrified railway fittings

Feature:

 1.Aramid yarn as strength member make cable have excellent tensile strength

 2.Compact structure with high fiber density, good performance of flexibility and crush resistance

 3.The jacket anti-corrosion, anti-water, anti-ultraviolet radiation, flame-retardant and harmless to enviroment etc.

 4.All dielectric structure protect it from electromagnetic influence

 5.Scientific design with serious processing art

 Standards:

 Comply with standard YD/T 1258.4-2005,IECA-596,GR-409,IEC 60794-2-20/21,ect; and meet the requirement of UL approval for OFNR.

Application: 

1. Ribbon optical fiber jumper and pigtail

2. Indoor cable distribution for any purpose

3. Interconnect between optical fiber cable distribution equipment

buy guy-grip dead ends from china

Guy-grip dead ends Features:

1)Structure is simple, can be easily installed

2)Its legs twisted wire preformed and the formation of air traffic control, rear twist for the preforming ring.The formation of preformed wire legs wrapped in wire can produce a very strong grip force, twist the ring to fix the insulator.

3) The clamp distributing the stress uniformity, improved ability of aseismatic without any damage on conductor.

Application:

The preformed dead-end can be used in the main and branch distribution line of bare overhead conductors and insulated wire.It can replace the commonly used line Clamp.

OPGW preformed china suspension clamp

OPGW preformed china suspension clamp is mainly used to support the suspend OPGW cable. It is suitable for the OPGW cable, conductor and grounding wire on transmission line. It is recommended used on the line with turning angle less than 30 degree.

suspension clamp

1.Suspension housing:aluminum
2.Rubber insert:Rubber
3.Outer rods:Aluminum alloy rods
4.U-link:
Hot dip galvanized

Features:
1.Reasonable distribution of static stress, good endurance capacity for dynamic stress (such as vibration and waving). The grip strength to cable can reach 10%~20% of cable's ultimate tension strength.
2. No rigidity contact with cable(conductor), minimum abrasion.
3. Excellent materials make the clamp has good elasticity, well tenacity, strong fatigue resistance, well corrosion resistance and long & safe service life.
4. Not only protecting cable, its round and smooth outer shape can reduce the corona discharge and electromagnetic loss immensely.
Composition: Inner reinforcing rod, outer rod, rubber insert, suspension housing, grounding wire, etc.


Welcome to contact Hebei Boersen Photoelectric Equipment Technology Co.,Ltd , the  prefessional suspension clamp factory
Our service:
1.reasonable prices;
2.short production times;
3.satisfactory after-sales services;
Mutual development , mutual benefits.

For more information, please visit http://www.preformedfittings.com/

Preformed Armor Rods Forming Machine design

Hebei Boersen Photoelectric Equipment Technology Co.,Ltd. is a specializing in designing and producing preformed Armor Rods Forming Machine,this machine is processed for preformed helical fitting products, the material is include Zinc-coated wire, Aluminum-clad steel wire, Aluminum-alloy wire and Coppered steel wire.We have high tech strength to supply various  preformed tension clamp/armor rods equipment, any of your requirement, welcome to contact us.

Preformed Armor Rods Forming Machine

Specification
1. Forming speed: 0-1.5m/s , Diameter: 1.67-5.2mm（the aluminum clad steel wire or galvanized steel wire), 1.78-9.27mm（aluminum alloy wire）
2. One group of product length tolerance range:±2mm
3. Three kinds of feed tray selection, can be designed according to user requirements
4. Equipment controlled by PLC

Our service
1. Consulting Services
We provide consulting service whole day,if there is any problems about use the products,please call the consulting service phone: 0311-66175382
2. Online Services
Beside the phone consulting,you also can consulting us online for free.(online message,email etc.)
3. Training
When you choose our products,we will provide personnel training,relative documents,to explain the products principle,the function of the various component, common faults and daily maintenance etc.To provide the strong guarantee for the customers use our products.
4. Paid service
For the warranty period expire products and technical support,we will service according to the customer demand.The detail fee standard please consult our after-sales service department.

This article comes from http://www.preformedfittings.com/Preformed-Armor-Rods-Forming-Machine-1259.html

OPGW&ADSS strain Clamp suppliers

Shijiazhuang Paerpu Import and Export Trading Co.,Ltd is aimed to be the leading OPGW&ADSS strain Clamp suppliers in china, We pay more attention to the product quality all time .All the insulators have been tested 100% strictly by IEC Standard or ANSI Standard. We ensure the rate of qualified Production up to 100% before delivery.

Strain clamp

Based on good quality and service,We have supplied these parts to many well known customers all over the world. We can provide the qualified products with competitive prrices. Hope you are interested in these parts too. Looking forward to your kind drawings or specification to quote the prices.
Product description

This type strain clamp is suitable for aerial line up to 35KV, fixing stranded aluminium wire or steel-cored aluminium strand on the strain pole, aerial insulated aluminium conductor.

Specification
1. Material: aluminium alloy or forged iron
2. Breaking load: 20KN~120KN;
3. Advise model No or provide drawing when enquire;
4. Strain clamp, Bolt type strain clamp, suspension clamp, NLL, NLD

This article comes from http://www.preformedfittings.com/

Complete set electrical preformed fittings manufaturer

We are manufaturer of complete set electrical preformed fittings ,such as the preformed armor rods, which is used to keep the conductor from the vibration, clamp compressive stress, friction and abrasion, electric arc and other damages. The structure of the preformed armor rods andpreformed short armor rods is simple and a set of preformed rods become an empty pipe and enlace, holdand protect the conductor.he armor rods can protect the optical cable by preventing the vibration damper aluminum clamp from nipping directly onto the OPGW cables to cause damages of the cable.

Preformed armor rods

Features
1)The preformed armor rods holding the conductor tightly, avoid slip of conductor, and so that minimized theabrasion of conductor.
2)Due to the grip flexibility of preformed rods, it will keep the conductor from loosen.
3)The raw material have been sealed with stainless, so that to keep excellent corrosion resistance.
4) Installed by hand directly, no need special tool.
5)Easy to guarantee the quality of installation, checked by optic view without special training.
6) The preformed rods is a very common fitting, it can be matched with different clamps.

This article comes from http://www.preformedfittings.com/product/Electric-power-fittings/

Electric power fittings introduction

                                                                                               
Here we'd like to introduce  one type of Electric power fittings, the guy grip dead ends , whose Wire clip is made of galvanized steel wire,aluminum wire, aluminum alloy wire, copper clad steel wire, etc.Standard products have an open helix loop but they can be supplied with a cabled loop to prevent slackening of the line after prolonged installation.

Guy grip dead ends

Features:                                                                                          
1. Structure is simple, can be easily installed.
2. It's legs twisted wire preformed and the formation of air traffic control, rear twist for the preforming ring.The formation of preformed wire legs wrapped in wire can produce a very strong grip force, twist the ring to fix the insulator.
3. The clamp distributing the stress uniformity, improved ability of aseismatic without any damage on conductor.

Our advantage
We are factory of various lectric power fittings, such as linking fitting, protective fitting,splicing fitting, clamps,connectors etc. Our most distinguished advantage is we can design or organized the complete suspension or tension insulator string according to your need. Please contact us for more information.

This article comes from http://www.preformedfittings.com/product/Electric-power-fittings/

Down-leading Clamp belong to OPGW&ADSS preformed fittings

We are OPGW&ADSS preformed fittings manufacturer,we can supply Down-leading Clamp,It is used in fixing OPGW optical cable or ADSS optical cable on the tower. It is suitable for cables with different diameters. It is reliable and easy to install.  Drop clamp has two types,one is for pole and the other is  for  tower, ADSS optical cable adopts rubber clamp in generally,OPGW optical cable adopts metal.

 Down-leading Clamp

For example: the cable’s fixed from holding armor leads to joint protective box; from the hole leads to underground pipe, canal, underground and motor room, etc.. Avoiding the friction occurs when the cable rubs with the hole or other objects under the wind to protect the cable.

Material                                                                                        
1. Damper—Hot dip galvanized cast iron
2. Messenger Wire—19 strand galvanized steel wires
3. Clamp—Aluminium Alloy

This article comes from http://www.preformedfittings.com/product/ADSS-and-OPGW-cable/

Manufacture OPGW&ADSS assembly

Shijiazhuang Paerpu Import and Export Trading Co.,Ltd. mainly manufacture OPGW&ADSS assembly,including preformed Tension Clamp,preformed Suspension Clamp,Vibration Damper,Cable Joint Box,Down Lead Clamp and so on.  The cable storage， one of the OPGW&ADSS assembly,is used in collecting  reserved optical cable on the connecting tower(pole),on strain  tower (pole)generally.

cable storage

Specification
1.Tensile Strength (N / square mm):375 N /mm2 up to 510 N/mm2
2.Yield Point (N / square mm):235 N/mm2
3.Zinc Coating Wt (gram / square meter):505
4.Zinc Coating Thickness ( microns ):85 or 100
5. Zinc Coating standard :ASTM 152 /123,  BS 729


Our Services
1. Excellent One-stop service
2. High Quality Precision Customized forging & Casting services
3. The lowest price
4. Strict quality control

This article comes from http://www.preformedfittings.com/product/ADSS-and-OPGW-cable/

Preformed armour rods of OPGW&ADSS strain assembly

Shijiazhuang Paerpu Import and Export Trading Co.,Ltd.  is the factory of OPGW&ADSS strain assembly , one of our main products is preformed armour rods,which protect wire from the vibration of wire, clamp pressure stress, friction, electric arc and all other external damage.

Preformed Armor Rod 

Specification
Material: Aluminium clad steel
Finish: Galvanized
Span Length:0~ 800m
Certificate:ISO9001-2008
Processing Quality: Smooth surface, Burr-free, Homogeneous material, Well-distributed for Zinc coating

Preformed Armor Rod features:
1. Preformed Aluminium Alloy Armor Rod are used to protech conductor from vibration, clamp pressure friction, it also pretect teh conductor by reducing bending, compresion and abrasion at the support point
2.The material of Preformed Aluminium Alloy Armor Rod are Aluminum Alloy Wire
3.A set of rods make a hollow tube, it can protect the conductor by the grip which is produced when rods packs teh conductor
4. Preformed Aluminium Alloy Armor Rod are design for use with ACSR, AACM, ACSS conductors.

This article comes from http://www.preformedfittings.com/product/ADSS-and-OPGW-cable/

overhead lines equipment factory

Shijiazhuang Paerpu Import and Export Trading Co.,Ltd. is a professional factory, which manufacture and sale many types of overhead lines equipment, Preformed ADSS & OPGW Cable, Preformed Products for Transmission & Distribution and electrified railway fittings. We sincerely look forward to your kind inquiry.

Preformed Armor Rods Forming Machine

Product for example:preformed Armor Rods Forming Machine
Detail description
1. Suitable for processing the preformed strain clamp ,preformed suspension clamp and the preformed protection  fittings (material:the aluminum clad steel wire or galvanized steel wire)
2. Forming speed: 0-1.5m/s , Diameter: 1.67-5.2mm（the aluminum clad steel wire or galvanized steel wire), 1.78-9.27mm（aluminum alloy wire）
3. One group of product length tolerance range:±2mm
4. Three kinds of feed tray selection, can be designed according to user requirements
5. Equipment controlled by PLC

This article comes from http://www.preformedfittings.com/contact/

Down-leading Clamp For ADSS (AYDZ/AYGD)

we are Down-Leading Clamp manufacturer,we can supply Down-leading Clamp,It fixes the down-leading or up-leading cable from the poles/towers to the poles/towers, preventing shaking, and avoiding attrition.

Preformed Armor Rods Forming Machine

1. Suitable for processing the preformed strain clamp ,preformed suspension clamp and the preformed protection  fittings (material:the aluminum clad steel wire or galvanized steel wire)

2. Forming speed: 0-1.5m/s , Diameter: 1.67-5.2mm（the aluminum clad steel wire or galvanized steel wire), 1.78-9.27mm（aluminum alloy wire）

3. One group of product length tolerance range:±2mm

4. Three kinds of feed tray selection, can be designed according to user requirements

5. Equipment controlled by PLC

PVC Bird Diverter

Splice Closures For ADSS

Excess length of fiber connecting and branch-connecting. It's fit to each structure of 12-72core cables with its diameter less than 18.5mm in overhead lines.

Conditions for the usage

Excess length of fiber connecting and branch-connecting. It's fit to each structure of 12-72core cables with its diameter less than 18.5mm in overhead lines.

Structure characteristic

1. Excess length of fiber is protected in stacking tray, each one is a space for 12 cores fiber. Hot-melting & hot-shrinking with a covering-pipe toprotect is the connecting form.

2. Stacking tray is designed as unattached tray for free operating without affecting each other.

3. The adoption of sealed gaskets and cone-shaped sealed gasket is suitable to cater different cables diameter, four cables should be installed in a splice closure if you need. It's convinent to be repaired as a result of the structure which is easy to open and close.

4. The metal parts of the cables should be lead out during the installation. We've prepared special fixed brackets which is safe and easy to install.

Capacity parameter

Stacking semi-diameter: ≥40mm 

Length of stacking rest: ≥1.6m 

Degree of seal: 1 05Kpa 

Temperature scale: -40   60 

Anti-tension: 2000N 

Anti side-pressure: 2500m/10cm

 Anti-wallop: 1 8N·m

The advantages of preformed dead end grip

The preformed dead end grip is able to endure the high intension and grip strength. The grip strength of clamp is not less than 100% CUTS.It can distribute the stress uniformity, improved ability of aseismatic without any damage on conductor..So that extended the using life of the conductor.Besedies,It bears the excellence of easy installation and construction, Shorted the working time. Operated this clamp by one person and need the special tool.Easy to guarantee the quality of installation, inspectioned by optic view without special trainning.I has prefect corrosion resistance; The same material with conductor promiss that the clamp owned excellent ability of electrochemistry corrosion resistance

Preformed dead end grip

Component:Preformed rod, connector(hoop, U-shackle, etc.)
Certificate:ISO 9001:2008
Application:
1. For ADSS cable line's fixing, griping and pulling.
2. Installed on angle, tension and terminal tower and pole within 50-200m span.

Type&Structure
1. Guy Grip Clamp can be divided into the ordinary for the ordinary Guy Grip clamp, adjustable Guy Grip clamp for fixed large-scale Tower and a large microwave tower Guy Grip clamp, etc..It can replace commonly used in domestic fixed-line tower on the UT Guy Grip clamp, wedge clamp, etc.
2. Guy Grip  clamp preformed wire legs twisted and the formation of air traffic control, rear for the preformed cutter ring.The formation of preformed wire legs wrapped in air traffic control when the Guy  line can produce a strong grip strength, and to fix the twisted ring anchor or tower on the ground.

This article comes from  http://www.preformedfittings.com/contact/

Hot dip galvanized and preformed Grip grip dead-end

Hot dip galvanized and preformed Grip grip dead-end is designed to grip the conductor uniformly to prevent distortion of the conductor.Guy grip also offers a unique design that eliminates bolts, nuts,washers and other component parts that may become lostor damaged during installation or in service.During installation, and at all times, care should be taken to avoid gouging or damaging the coating of the Distribution-Guy Grip dead-end or the conductor itself.

 Preformed Grip grip dead-end

Material&Strcturer
1. Thimble:Hot dip galvanized steel precision thimble, in the U-shape bending head, which can make tension clamp connect with exstrain rod.
2. Shackle:Hot galvanized steel shackles play a role in connection with the tower fasteners. Failure load: U-7 to 70kN, U-10 to 100kN, U-12 to 120kN.
3. Preformed tension rods:Be made of galvanized steel wire or aluminum clad steel and preformed into the process when prefabricated beam, inner wall layer of emery stick, and enhance the friction between clamp and cable.
4. Preformed armour rods:Galvanized steel or aluminum clad steel wire, preformed armour rods wall sticky particulate silicon carbide to increase friction and reduce the pressure on the cable side. preformed rods  when the pre-processing into several sub-beams, to avoid installation errors and to facilitate rapid installation. Preformed wire toward the end of different specifications according to the radial lateral bending, to avoid vibration in the breeze under the cable clamp at the end of the friction and prevent damage to cable extrusion.

This article comes from  http://www.preformedfittings.com/news/

Guy-grip dead end introduction

Guy-grip dead end introduction
Preformed Guy-grip dead end is designed to fix terminals tower stay wire and where the large size stay wires are needed, such as electric transmission line, antenna, correspondence and lines etc, which can replace the common U-T clamps and wedge type clamps of line tower. The  clamp structure is simple. Two legs of Helical wire form an empty pipe, and its rear is a Helical stranding link. After coiled around the stay wire, the two legs of Helical wire can generate great grip strength, and stranding link is fixed on the earth anchor or tower. The unique theory and structure provide the clamp with particular function and vivid characters.

Guy-grip dead end

Competitive Advantage:
1. The  preformed guy grip is able to endure the high intension and grip strength. The grip strength of clamp is not less than 100% CUTS.
2. The preformed guy grip distributing the stress uniformity, improved ability of aseismatic without any damage on conductor..So that extended the using life of the conductor.
3. It bears the excellence of easy installation and construction, Shorted the working time. Operated this clamp by one person and need the special tool.
4. Easy to guarantee the quality of installation, inspectioned by optic view without special trainning.
5. Prefect corrosion resistance; The same material with conductor promiss that the clamp owned excellent ability of electrochemistry corrosion resistance

Shijiazhuang Paerpu Import and Export Trading Co.,Ltd is the leading manufacturer specilized in manufacturing different kinds of power fittings,cable fittings and so on in China,manufacturing according to the ISO 9001:2008 quality control system guidelines.OEM is acceptable, please feel free to contact us.

This article comes from http://www.preformedfittings.com/news/