ADSS & OPGW Cable

Hebei Boersen Photoelectric Equipment Technology Co.,Ltd. is a professional new technology enterprise which develop, exploit, manufacture and sale Preformed tension clamp/armor rods equipment, Preformed ADSS & OPGW Cable, Preformed Products for Transmission & Distribution and electrified railway fittings.

1.Introduction of OPGW cable
OPGW is a type of cable structure with composite of optical transmission and overhead ground wire for power transmission. It’s working in power transmission line both as optical fiber cable and overhead ground wire which can provide protection of lightning strike and conducting short circuit currency.

The OPGW consist of stainless steel tube optical unit, aluminium cladding steel wire, aluminum alloy wire.It has central stainless steel tube structure and layer stranding structure. We can design the structure according to different environment condition and customer’s requirements.

OPGW cable

Features:
• Stainless-steel optical fiber unit of central loose tube or layer stranding structure
• Aluminium alloy wire and aluminium clad steel wire armored
• Coated with anticorrosive grease between layers
• OPGW can support heavy load and long span installation
• OPGW can meet the ground wire‘s requirement of mechanical and electric by adjusting proportion of steel and aluminium.
• Easy to produce the similar specification of exist ground wire can replace the exist ground wire.

Application properties:
• Adapt to replace the aged ground wire and new structure of high voltage ground wire.
• Lighting protection and conduct the short circuit current.
• Optical fiber communication ability

This article comes from http://www.preformedfittings.com/Product/

PVC Bird Diverter

PVC Bird Diverter is designed for use on overhead conductors to create greater visibility for avian flight paths on overhead lines and tower down guys. Offering little wind resistance, it reduces hazards to both lines and birds. For low and medium voltage construction, apply flight diverter to phase conductors (bare or jacketed). For high voltages, it is typically used on shield wire.

Flight diverter is lightweight, offers little wind resistance and is easily and quickly applied by hand or hot stick. The positive grip on the conductor isdesigned to ensure that flight diverter remains in the applied location and does not move along the span under Aeolian vibration or other conditions.

PVC Bird Diverter

Materials:
Manufactured from rigid high impact polyvinyl chloride (PVC), Fly diverter possesses excellent chemical resistance, strength properties and will retain good physical characteristics within a range of extreme temperatures. Industrial fumes and salt water cannot seriously degrade the properties of rigid PVC.

Features:
1.Flight diverters are designed to offer the following advantages:
2.Increased conductor profile to provide increased visibility where large, slow moving bird flight paths are present
3.Economical and easily applied
4.Lightweight
5.Long service life without deterioration of material properties
6.Minimal wind resistance

This article comes from http://www.preformedfittings.com/PVC-Bird-Diverter-1306.html

Preformed guy-grip dead ends

Preformed guy-grip dead ends are used for fixing terminals tower stay wire and where the large size stay wires are needed, such as electric transmission line, antenna, correspondence and lines etc, which can replace the common U-T clamps and wedge type clamps of line tower. The  clamp structure is simple. Two legs of Helical wire form an empty pipe, and its rear is a Helical stranding link. After coiled around the stay wire, the two legs of Helical wire can generate great grip strength, and stranding link is fixed on the earth anchor or tower. The unique theory and structure provide the clamp with particular function and vivid characters.

guy-grip dead ends

1.Component: Inner preformed wire, outer preformed wire, suspension link, ground wire.
2.Usage: OPGW preformed rods tension clamp is used for OPGW cable route’s fixing and anchor shackling. Usually be installed on the terminal tower, tight tension tower and intersection angle tower etc.

Feature:
1.The holding strength can reach over 95% RTS without the effects of stress concentration and vibration stress.
2.Excellent aluminum clad steel improve the mechanical and resist-corrosion function, extend life.

This article comes from http://www.preformedfittings.com/news/

Preformed ADSS & OPGW cable tension set

Preformed ADSS & OPGW cable tension set is designed to connect ADSS/OPGW cables and tensile poles(or towers). Aluminium clad steel rods can protect and provide cushioning to the ADSS/OPGW cables. The special design of helical rods makes ensure that tension sets can not cause undue stress to the ADSS/OPGW cables
so that the normal lifetime of cable system is ensured.Aluminum clad preformed strand can protect cable and improve anti-vibration function.With special design, preformed strand can ensure the tension clamp wouldn’t generate stress concentration which big enough to damage OPGW cable.The consumers can choose tension clamp according to cable diameter, maximum allowable tension and spacing.

tension set

Advantage:
1.Stress can be distributed equally among the ADSS/OPGW cable surface without stress centralization to protect ADSS/OPGW cable.
2.It has higher grip strength for the cable and can support higher tensile force when stress doesn't exceed the optical cable's side strength.
3.The grip strength for the cable is not less than 95% rated tension strength(RTS),of the optical cable,fully suitable for the installation of ADSS/OPGW cable.
4.The surface and the smooth shaped of end improve the discharging voltage and reduce the loss of electric power.
5.The superior aluminum alloy material has higher comprehensive mechanical performence and cauterization resisting capability,and extends the lifetime usage.
6.Easy installation, no need for special tools, no need for maintenance.

This article comes from http://www.preformedfittings.com/Product/

Preformed dead end grip

Preformed dead end grip is used in the installation of the exposed conductor also used in electric network transmission and distribution and overhead insulated conductor. The reliability and economic advantage is better than the present bolt type and hydraulic compression type Tension Set which now is being widely used in the line.The structure of the Preformed Tension Set is simple , and the pipe structure formed by the two legs of the preformed line would enlace the conductor naturely and would produce a great holding strength. The novel structure and exact design all contribute to the reliability of the conductor tension set.The set is usually made of concentric-lay-stranded Aluminium-clad steel conductors ,galvanized iron wire strands and other materials.

dead end grip

Competitive Advantage:
1) The preformed guy grip is able to endure the high intension and grip strength. The grip strength of clamp is not less than 100% CUTS.
2) The preformed guy grip distributing the stress uniformity, improved ability of aseismatic without any damage on conductor..So that extended the using life of the conductor.
3) It bears the excellence of easy installation and construction, Shorted the working time. Operated this clamp by one person and need the special tool.
4) Easy to guarantee the quality of installation, inspectioned by optic view without special trainning.
5) Prefect corrosion resistance; The same material with conductor promiss that the clamp owned excellent ability of electrochemistry corrosion resistance

This article comes from http://www.preformedfittings.com/contact/

preformed cable fittings products factory

Hebei Boersen Photoelectric Equipment Technology Co.,Ltd. is a professional preformed cable fittings products factory,manufacture and sale Preformed tension clamp/armor rods equipment, Preformed ADSS & OPGW Cable, Preformed Products for Transmission & Distribution and electrified railway fittings.

preformed tension clamp

Item:preformed tension clamp
The preformed tension clamp for OPGW is  used to connect terminal support, tension support, splice support and support of angle greater than 25° in setting up ADSS. The configuration includes terminal support-1set/support, tension support-2sets/support, support of angle over  25°(angle)-2sets/support, splice support.

The componets of preformed tension clamp for OPGW includes: Inner preformed armor rods, outer tension preformed rods,  a thimble , a clevis, two anchor shackles .

Product structure
1.Inner preformed armor rods: Aluminum-clad steel with particulate grit applied to
increase friction.
2.Outer tension preformed rods: Aluminum-clad steel with firm grit applied and the individual rod assembled into groups
to increase the strength of tension clamp in the condition of decreasing the stress imposed on cable.
3.Thimble clevis: Hot galvanized steel .
There are there types : 70kN,100kN,120kN.
4.Clevis: Hot galvanized steel . It is used to conect thimble clevis and anchor
shackle. There are three types : 70KN,100KN, 120KN .
5.Anchor shackle: Hot galvanized steel . It aims at connecting support
fastening.

This article comes from http://www.preformedfittings.com/About/

Preformed armor rods for OPGW cable

Preformed armor rods are designed to protect the conductor reducing bending,compression,and abrasion at the support point .Protection against flasover damage is also provided.It is made from either aluminium alloy or galvanized steel ,they are designed for use with ACSR ,AAC,AAAC,ACSS,SSAC and ACSR conductors.

Preformed armor rods 

Features:
1)Color coded and Center Marked.
2)Repair Damage.
3)Vibration Protection.
4)Customized Armor rods .

Our services:
1.your inquiry related  to our products or prices will be replied within 24 hours
2.well-trained and experienced staffs to answer all your questions in fluent English.
3.OEM & ODM ,any your customized requirements we can do our best to help you realize.
4.protection of your sales area ,ideas of design and all your private information.

This article comes from http://www.preformedfittings.com/