Preformed guy grip is used in the installation of the exposed conductor also used in electric network transmission and distribution and overhead insulated conductor. The reliability and economic advantage is better than the present bolt type and hydraulic compression type Tension Set which now is being widely used in the line.The structure of the Preformed Tension Set is simple , and the pipe structure formed by the two legs of the preformed line would enlace the conductor naturely and would produce a great holding strength. The novel structure and exact design all contribute to the reliability of the conductor tension set.The set is usually made of concentric-lay-stranded Aluminium-clad steel conductors ,galvanized iron wire strands and other materials.
 |
| Proformed guy grip |
1. Size:As Your Request
2. Finishing Hot-dip galvanized,stranded,sand blast,Ending treatment
3. Zinc thickness no less 300g/m2
4. Turn left/right up to needs.
5. Tensile strength of wine over 1380mpa
6. 360º torsion over 14 times.
7. MOQ:100PCS
8. Standard:ISO9001
This article comes from http://www.preformedfittings.com/product/Electric-power-fittings/Guy-grip-dead-ends/
没有评论:
发表评论