Aluminium Guy-grip dead ends

Guy-grip dead ends installed at the top, the breaker and the anchor, provide today’s most effective method for securing guy strand. This unique, one-piece dead-end is neat in appearance and free from bolts or high-stress holding devices. The GUY-GRIP Dead-end was the first to offer the cabled loop, a feature that provides more durabil- ity, easier tensioning and adaptability to multiple guying.
GUY-GRIP Dead-ends are made of the same material as the strand to which they are applied. They should be used on hardware that is held in a fixed position.The fitting should not be allowed to rotate or spin about the axis of the strand. They should not be used as tools including come-alongs, pulling-in grips, etc.

Guy-grip dead ends

Material:
1.Preformed helical rods: Aluminium-Clad Steel Wires
2.Thimble: Hot Dip Galvanized Steel
TOLERANCES:LENGTH -10mm-+20mm.

Application:
1. For attachment cables to the poles and towers in overhead transmission line.
2. Perfect protection to the optical fiber cable, relieve the vibration, extend the service life of the cable.

Feature:
1. Easy installation.
2. Good mechanical properties and electrical properties, and powerful corrosion resistance.
3. Full range of specifications to meet demands of various of span and voltages.

This article comes from http://www.preformedfittings.com/news/