2017年3月7日星期二

OPGW&ADSS Tension Set

OPGW&ADSS Tension Set
The large-span tension sets can protect and provide cushioning to the ADSS cables. The special design of helical rods makes ensure that preformed dead-ends can not cause undue stress to the ADSS cables, so that the normal lifetime of cable system is ensured.
RTS (Rated Tensile Strength): 30KN~ 120KN
Span length: 300m ~ 1200m
OPGW&ADSS Tension Set

1. Structure and Raw Material:
(1) Anchor Shackle: Hot dipped galvanized steel. Anchor Shackle is connected with fastener clamp on tensile pole (or tower).
(2) Extension Link: Hot dipped galvanized steel. Parallel Plate is connected Anchor Shackle and Clevis Thimble.
(3) Clevis Thimble: Hot galvanized cast steel. Clevis Thimble is plugged in bend of Outer Reinforcing Rods for protection and connected.
(4) Inner reinforcing Rods: Inner reinforcing rods are made of aluminium clad steel rods. With a layer of particle emery inside, Inner Protection Rods can increase friction and decrease side pressure to cables. Rods are made into four subsets which can reduce misalignment errors and speeds installation. The ends are bent outward to avoid stress to OPGW cables.
(5) Outer dead-end Rods: Rods are made into one subset with a layer of firm emery inside, in order to increase gripping power of Outer Reinforcing Rods while decreasing side pressure. Sets are color marked to reduce misalignment errors and to speed installation

For more information,pls visit http://www.preformedfittings.com/About/

没有评论:

发表评论