2016年11月9日星期三

Preformed ADSS & OPGW cable

Preformed ADSS & OPGW cable is made of non-metallic material and self-supporting with the aerial power transmission line. The tension resistance material is aramid yarn with high elasticity modules. And optimizing structure can deploy the weight of the cable and its mechanical and physical properties appropriately and minimize the load on the tower.
Preformed ADSS & OPGW

Application:
Environment with high electric field strength in the Power communication system and the area where frequent thunder happens

Features
1.Can be installed without shutting off the power
2.Excellent AT performance ,The Maximum inductive at the operating point of AT sheath can reach 25 KV
3.Light weight and small diameter reducing the load caused by ice and wind and the load on towers and backprops
4.Large Span lengths and the largest span is over 1000m
5.Accurate control on Aramid application greatly improving the strength of cables
6.Accurate fiber excess length and stranding pitch to ensure the good performance of tensile strength and the temperature
7.The design life span is over 30 years

This article comes from http://www.preformedfittings.com/Product/

2016年11月6日星期日

Preformed Guy Grip in Electric power fittings

Preformed Guy Grip in Electric power fittings is made of numbers of helical preformed rods which are produced according to cable diameter. The preformed rods will be pasted into a bundle and then be twisted, bended and shaped.

Since the spiral inner diameter of guy grip is smaller than the cable diameter, it will produce strong grip strength after the two legs of guy grip are wrapped onto the cable.
Preformed Guy Grip

Features
1.Favorable tensile property
2.Better shock-resistant ability with uniform stress and without stress concentration.
3.Excellent resistance to corrosion
4.Convenient installation

This article comes from http://www.preformedfittings.com/product/Electric-power-fittings/

OPGW cable preformed armor rods

The preformed armor rods have been used in transmission and distribution,fiber optic communications,electrication of railways, cable TV, construction, agriculture, and other fields. In order to prevent the point of hanging overhead power lines from being damaged by vibration, the preformed armor rods protect the wire line installation in line at the clamp, so that the clamp near the stiffness of the enhanced inhibition of the wire due to vibration and bending and compressive stress and wear, increasing the earthquke-resistant capacity of the wire.
preformed armor rods

Product advantages
1.Special material for superior quality and longevity
2.Phosphating surface finish for environmental protection ,rust protection and best price
3.Attractive appearance
4.long service life
5.Good high-low temperature resistance


For detail product specification, please visit our home website.

This article comes from http://www.preformedfittings.com/

2016年11月4日星期五

1 hole Perfomance Cable Suspension Clamp

1 hole Perfomance Cable Suspension Clamp
Item Name: Feeder Cable Clamp
Clamp Class: Through Type
Plastic Material: Polypropylene (PP) / ABS
Metal Material: Stainless Steel
Clamp Stack: Single,Double,Triple,Fourfold Stack
Match Cable: 1/4",3/8",1/2",7/8",1-1/4",1-5/8" ,2-1/4 Feeder *
Match Cable: RG8,RG213,LMR400 Coaxial Cable
Usage:mobile communication base station(GSM,CDMA,GPRS,etc)
Cable Suspension Clamp

Product feature:
1.well anticorrosion
2.well mechanical property
3.well performance ratio
4.The feeder clamp designed according to the YD/T109standard.
5.suitable for the 1/4",3/8",1/2",7/8",1-1/4",1-5/8",and 2-1/4" cable.
6.Type:through type,along the wall type,anchorear type,hook type;hose clamp type,leakage cable type
7.Made of stainless anti-acid steels with high quality for microwave and mobile systems. Anti-corrosion under various weather conditions

This article comes from http://www.preformedfittings.com/

high-strength aluminum alloy strain clamp

The body of NLL series aluminum alloy strain clamp is made of high-strength aluminum alloy ,it is suitable for aerial line up to 20kV, fixing aluminum wire or steel core minium wire on the strain pole, aerial insulation aluminum conductor and insulation aluminum cover are being used together, and the action is insulation protection.
Strain clamp


Insulation cover performance feature  
1.Withstand voltage: ≥18kV keep voltage one minute not break down
2.Insulation resistance: >1.0×1014Ω
3.Environments temperature: -30℃~90℃
4.Weather proof performance: have good performanced after 1008 hours artifical climate aging test.

This article comes from http://www.preformedfittings.com/

2016年11月2日星期三

Strain clamp used to AAC and ACSR

Strain clamp is used to fix conductor and ground wire through insulators or link fitting to tower arms or substation structures. In according to the clamp construction and mounting way, the clamps include two types as compression type and bolt type.
Strain clamps


NLL series bolt type aluminium alloy strain clamp is used to AAC and ACSR, the conductor may be wound or performed armour rods for protecting.

Material: Body and keeper- aluminium alloy /Hot-DIP galvanized ductile iron, others-Hot-DIP galvanized steel
Process: Casting and Forging
Ultimate strength: From 40 to 120 KN

We have supplied these parts to many well known customers all over the world. We can provide the qualified products with competitive prrices. Hope you are interested in these parts too. Looking forward to your kind drawings or specification to quote the prices.

This article comes from http://www.preformedfittings.com/

2016年11月1日星期二

Aluminium Guy-grip dead ends

Guy-grip dead ends installed at the top, the breaker and the anchor, provide today’s most effective method for securing guy strand. This unique, one-piece dead-end is neat in appearance and free from bolts or high-stress holding devices. The GUY-GRIP Dead-end was the first to offer the cabled loop, a feature that provides more durabil- ity, easier tensioning and adaptability to multiple guying.
GUY-GRIP Dead-ends are made of the same material as the strand to which they are applied. They should be used on hardware that is held in a fixed position.The fitting should not be allowed to rotate or spin about the axis of the strand. They should not be used as tools including come-alongs, pulling-in grips, etc.
Guy-grip dead ends

Material:
1.Preformed helical rods: Aluminium-Clad Steel Wires
2.Thimble: Hot Dip Galvanized Steel
TOLERANCES:LENGTH -10mm-+20mm.

Application:
1. For attachment cables to the poles and towers in overhead transmission line.
2. Perfect protection to the optical fiber cable, relieve the vibration, extend the service life of the cable.

Feature:
1. Easy installation.
2. Good mechanical properties and electrical properties, and powerful corrosion resistance.
3. Full range of specifications to meet demands of various of span and voltages.

This article comes from http://www.preformedfittings.com/news/