Where Can I Find Optical Cable China Manufacturer

Description

1. Fiber Optic FBT splitter is a type of optical power management device that is fabricated using Fused Biconical Tape technology.

2. It features small size, high reliability, cheap cost and good channel-to-channel uniformity, and is widely used in PON networks to realize optical signal power splitting.

3. We provides whole series of 1xN and 2xN splitter products that are tailored for specific applications.

4. All products meet GR-1209-CORE and GR-1221-CORE

5. The splitting ratio ranges from 1x2 to 1x24 ports for tree couplers, and from 2x2 up to 4x4 for star couplers. Available in single, dual, and tripple wavelength windows(1310/1490/1550nm).

Applications                                                           

Long-haul Telecommunications

CATV Systems

Fiber Optic Sensors

Local Area Network

 

Features

Low Excess loss

Low PDL

Environmentally stable

Good Thermal Stability

For more information on Optical Cable China Manufacturer,please click.

Use of Preformed ADSS & OPGW cable

Preformed ADSS & OPGW cable

We have a Export  Department,which specialize in the export of various  products made by ourselves including suspension line fitting , tension line fitting and power accessories and so on. During the nearly 20years, we have built good business relationships with customers abroad ,90%of our products has been widely used in Korea, Southeast Asia, Iraq, Zambia, the Middle East, Saudi Arabia, Australia and other countries and regions

We will be responsible for packing the stores suitable for transit by sea/rail/road so as to ensure their being free from loss or damage on arrival at destination

Connection fittings, protection fittings and cable fittings and purpose of classification

Splicing Fitting:
(1) connecting pipe. Also known as pressure to take over for the large cross-section wire connection and ground connection.
(2) Buxiu tube. Mainly used for wire and grounding wire repair.

Protective fittings

(3) and groove clamp. Mainly used for wire and ground jumper connection.


Protective fittings:
(1) Dampers. Inhibition of wires and lightning line vibrations from the vibration isolating effect.
(2) preformed wire line protection. Protective conductor.
(3) weight. Suppressing suspension insulator string swing angle is too large and linear wire rod, the lightning line of pull.
(4) spacer. Fixed splitting wires arranged in geometric shapes.
Cable fittings:
(1) UT-clamp. Under normal circumstances can be used to debug the cable portion and lower connection cable distaff, not adjustable for the upper end of the cable, but also flip.
(2) wedge clamp. Tara online for fixing the rod end.
(3) Pull the second joint plate. Using dual cable.

Optical cable fittings

Optical cable fittings Description:
1. Applicable in the straight through or branch connection of indoor optical cable
2. Available for the distribution and terminal connection of various kinds of optical fiber system
3.  Fit for wall mounted, especially for mini-network terminal distribution.

Feature:
1.Indoor
2.cold rolled steel sheet, with electrostatic spraying
3.Max capacity: 8 cores

Type Dimension (mm) Max Capacity (cores)
Co 8---------- 260x120x40---------8
 

Optical cable fittings

Remark:
This terminal box is made of cold rolled steel sheet, with electrostatic spraying and 8 outlets for pigtails.
Application 
1,1xX PLC Splitter  
2,Fast connector and adaptor inside

Preformed ADSS & OPGW cable

Preformed ADSS & OPGW cable
1. Preformed guy grips
2. ADSS/OPGW
3. 10.20-11.20
4. Preformed guy grips Adopts the steel wire, aluminum wire, aluminum alloy
Details
1. Preformed guy grips Armor Rod are designed to protect the conductor by
Reducing bending, compression, and abrasion at the support point.
2. Preformed guy grips Armor Rod are recommended as protection for spans greater
Than 300 ft. (91m).
3. Preformed Armor Rod are designed for use with ADSS, OPGW and
ACAR conductors
As well as Alumoweld and steel ground wire.
4. The material of Preformed Armor Rod is aluminum alloy or aluminum
Covered steel wire.

Preformed ADSS & OPGW cable

5. Preformed Armor Rod sets are manufactured with right-hand lay as

Name	Model	Dimension		Collocation	Suitable Cable Range
		L(mm)	Weight(kg)
Cable StorageAssembly	TJY 660-T	660	4.1	small splint	The dia. Of ADSS cable less than 14.8MM
	TJY 1000-T	1000	7.7		14.8MM The dia. Of ADSS/OPGW cable less than 14.8MM
	TJY 1200-T	1200	11.8		14.8MM The dia. Of OPGW cable less than 14.8MM
Cable StorageAssembly	TJY 660-H*	660	4.1	Support for pole	14.8MM The dia. Of ADSS cable less than 14.8MM
	TJY 1000-H*	1000	7.7		14.8MM,, The dia. Of ADSS/OPGW cable less than 14.8MM
	TJY 1200-D*	1200	11.8	Elbow hoop	14.8mm The dia. Of OPGW cable less than 14.8MM

optical cable China manufacturer

We are optical cable China manufacturer，welcome to contact us.
Data Rate: 

10 Gbs

Wavelength: 850nm

Maximun Distance: 100m

Fiber Type: Multimode Glass

Emitter: VCSEL

Voltage-Supply: 3.3V

Applications: Ethernet

Connector Type: LC Duplex

Mounting Type: Pluggable,SFP+

Lead Free Status / RoHS Status: Lead Free / RoHS Compliant

Moisture Sensitivity Level(MSL): 3(168 Hours)

optical cable China manufacturer

• Proven High Reliability 850 nm technology:VCSEL transmitter and PIN re

ceiver

• Maximum power dissipation 350 mW per Active Cable end

•SFP+ package design enables equipment EMI performance in high port density applications with margin to Class B limits

Preformed Armor Rods Basics

Preformed Armor Rods for overhead power conductors and overhead power cable termination, suspension, joints and other connections fittings.

Preformed wire as early as the 20th century, 40 - 50 years appeared in the United States, the initial product for bare wire stress concentration and electric corrosion protection spiral arc burning position line protection. After years of development, at present, preformed wire fittings have been widely used in the field of transmission and distribution, fiber-optic communications, electric railway, cable, construction, agriculture and so on.

Preformed payment of electricity than conventional electrical fittings, with its unique advantages, now more and more to win the majority of electrical fittings clients, its products sub-Preformed Clamp, suspension clamp, connecting fittings, protection fittings.

Optical cable fittings

Purpose: Optical cable fittings is mainly used for fixed composite overhead ground wire OPGW optical cable, anchor tight, generally installed in the terminal tower, tight line Tension tower, angle tower and other locations.
Features: preformed wire Clamp to grip the cable can reach more than 95% of ultimate tensile strength of the cable, no stress concentration and the effects of vibration stress.
Composition: Optical cable fittings assembly each comprising: an inner twisted wire, twisted wire outside, pull rings and other components.
Users can configure other optional connector according to the design requirements.
Clamp single purpose: OPGW single Clamp with Clamp similar effect. Corner can be used for 50 to 200 meters short span, Tension, terminal tower and so on, not only suitable for aerial cables, can be used for overhead wires, cable and other cable installation and anchoring construction for traction clamp used.
Features: The structure is simple, quick and easy installation.

Optical cable fittings

Composition: Single Clamp by wire-cutter, pull rings, U-rings and other components.

Single-Clamp can use according to the user's requirements and select aluminum-clad steel wire or galvanized steel wire material to manufacture.
Suspension clamp Uses: OPGW suspension clamp preformed wire is mainly used as a suspension cable, similar to the role of ordinary suspension clamp on the composite overhead ground wire OPGW fiber-optic cables. It is suitable for OPGW cable, transmission line conductors and ground use. Environmental corner ≤30o line when.
Features: 1, equitable distribution of low static stress and improve the dynamic stress (such as vibration or dancing) capacity, its ultimate tensile strength of the cable grip force of up to 10% to 20%.
2, the optical fiber cable (wire) no rigid contact (soft grip), the wear to a minimum.
3, excellent material so that the clip has good flexibility and toughness, fatigue resistance and strong corrosion resistance, safety, long service life.
4, not only effectively protect the cable (wire), and its smooth contours corona discharge and electromagnetic loss is greatly reduced.
Composition: Pre-twisted wire twisted wire suspension clamp from the inside and outside twisted wire, rubber plug, hanging plywood and other components. Connection fittings (users depending on design requirements from the distribution).
Fitting ground lead
Purpose: Fitting ground wire is mainly used for complex ground (OPGW) cable or overhead ground wire safety ground to improve the reliability of the grounding system. Aluminum stranded bare wire grounding assembly, composition and pressure thread screw / washer parts. Depending on the application environment and design requirements, you can choose the length of the grounding wire and single ram (A-type) or double indenter (B type).

Preformed ADSS & OPGW cable Basics

Clamp Uses: Preformed ADSS & OPGW cable mainly used for aerial self-supporting ADSS fiber optic cable fixed line, anchor tight, generally installed in the terminal tower, tight line Tension tower, angle tower and other locations. Composition: preformed wire Clamp assembly each comprising: an inner twisted wire, twisted wire outer pull ring. Users can configure other optional connector according to the design requirements. Features: preformed wire Clamp for wire (cable) grip up to the wire (cable) above the ultimate tensile strength (R.T.S) 95%, no stress concentration and vibration stress.

Clamp single purpose: ADSS single Clamp with Clamp similar effect. Corner is mainly used for 50 ~ 200 meters short span, Tension, terminal tower and so on, not only suitable for aerial cables, can be used for overhead wires, cable and other dock installation and construction of cable clamp used for traction. Features: The structure is simple, quick and easy installation. Composition: Single Clamp by wire-cutter, pull rings, U-rings and other components. Single-Clamp can use according to the user's requirements and select aluminum-clad steel wire or galvanized steel wire material to make

Preformed ADSS & OPGW cable

Suspension clamp Uses: ADSS suspension clamp preformed wire is mainly used for aerial self-supporting ADSS fiber optic cable on the line, optical cable for hanging purposes, similar to the role of ordinary hanging clamp. Recommended for use in environments when line ≤30º corner. Features: 1, equitable distribution of low static stress and improve the dynamic stress (such as vibration or dancing) capacity, which grip the cable up to the ultimate tensile strength (RTS) 10% to 20%. 2, with no rigid contact cable (Flexible Hold), the wear to a minimum. 3, excellent material so that the clip has good flexibility and toughness, fatigue resistance and strong corrosion resistance, safety, long service life. 4, not only effectively protect the cable, and its smooth contour shape corona discharge and electromagnetic loss is greatly reduced. Composition: preformed wire catenary wire cutter clamp from the inside and outside twisted wire, rubber plug, hanging plywood (housing) and other components. Users can configure it to buy its connector according to the design requirements.

We Produce Preformed armor rods

Preformed armor rods

Preformed armor rods
Preformed splice / Preformed Grip for guy wire or other cable.

Table Selection of Preformed Armor Rods for ACSR
Remark: Material of Preformed Armor Rods for ACSR is aluminum alloy wire;

Use and structure:
The preformed armor rods are used to keep the conductor from the vibration, clamp compressive stress, friction and abrasion, electric arc and other damages. The structure of the preformed armor rods andpreformed short armor rods is simple and a set of preformed rods become an empty pipe and enlace, holdand protect the conductor.

The product is suitable for the standard preformed rods for ACSR; It alwaysinstalled in the ship-type suspension clamp and support insulators. And it will not be used in splice or repairsleeve.
FYB type preformed armor rods are used for protecting conductor from damages subjected to vibration, clamp stress, friction, electric arc & other external influence. The preformed armor rods can prevent conductor from damage of electric arc, friction and other reasons on slight vibration short-span transmission line. On the other hand, they can be used for repairing rods, to remedy the damaged conductor for recovering the inherent mechanical strength & conductivity; on the other hand, they can be also used for protecting branch rods, stopping branch conductor from damages rising from electric arc & friction.

The preformed armor rods & short preformed armor rods are of simple structure in which each set of armor rods look like hollow tube, used for protecting the conductor wrapped up through forming holding strength.

Strain Clamp supplier

Strain Clamp supplier Description:
Material: Hot-dip galvanized steel ASTM A-36
Lengthening in 50mm minimum: 21%
Base: 50mm * 106mm (tolerance +10%)
The hardware is hot galvanized according to standards ISO R 1460, ISO R 1461
Hardware designed to hold ADSS 200m span

Material: Body and keeper- aluminium alloy /Hot-DIP galvanized ductile iron, others-Hot-DIP galvanized steel
Process: Casting and Forging

Strain Clamp supplier

Ultimate strength: From 40 to 120 KN

Product Model	Weight (kgs)	Min. tensile strength (Mpa)	Min. yield strength (Mpa)
FTM-A	1.43	400	250

Article and its thickness	Mean coating thickness (um)	Mean coating mass g/m2
Castings<=6mm	65um	460g/m2
Castings>6mm	80um	575g/m2

Strain Clamp supplier China

NLL series bolt type aluminum alloy strain clamp is suitable for 35KV or less than overhead circuit, fix aluminum wire or steel-aluminum wire on strain rod, overhead insulation aluminum conductor, it is for mating insulation aluminum cover, it takes insulation protection.

Strain Clamp supplier China Specifications

Eelectrical machine making

Max diameter of reel paper 1500mm

feeding paper quickly

controlled by motorized

symmetrical arm

Strain Clamp supplier China

Eelectrical shaftless mill roll stand  packaging machine
 
function and characteristics:

lReel paper lift-lower,clamp,loosen,movement, contraposition operated by motoriz

lReel paper strain control by manual brakes

lWidth of paper:600mm—1600mm 600mm—1800mm 600mm—2200mm

lInstallment power:6kw

lThe when clamping moving up and down sheets cycloid motor,and the thick paper used for covering arm overload or touch the ground,it’ll be effective to safeguard the machinery not to be damaged.

ADSS and OPGW cable

Description of ADSS and OPGW cable:
The central al-covered steel tube is surrounded by single or double layers of aluminum clad steel wires
(acs) or mix acs wires and aluminum alloy wires. al-covered stainless steel tube design increases
the cross section of al, to reach a better fault current and lightning resistance performance.
Apply to the transmission line which requires small diameter and large fault current.

ADSS and OPGW cable

Characteristic of ADSS and OPGW cable:
1. High quality standards for designing, testing and producing with grade A materials available to ensure
long-term reliability .
2. Engineering support supervising and providing its own line of accessories hardware .
3.Seal stainless steel tube superior protection to the fiber optical to moisture and extreme environmental
conditions such as lightening
4. To construct OPGW must cut power, resulting in greater loss, thus OPGW must be used in constructing
high pressure line over 110kv;
5. Apply to the transformation of old lines.

Guy-grip dead ends

Guy-grip dead ends
1.Guy Grip Clamp can be divided into the ordinary for the ordinary Guy Grip clamp, adjustable Guy Grip clamp for fixed large-scale Tower and a large microwave tower Guy Grip clamp, etc..It can replace commonly used in domestic fixed-line tower on the UT Guy Grip clamp, wedge clamp, etc.

Guy-grip dead ends

2.Guy Grip  clamp preformed wire legs twisted and the formation of air traffic control, rear for the preformed cutter ring.The formation of preformed wire legs wrapped in air traffic control when the Guy  line can produce a strong grip strength, and to fix the twisted ring anchor or tower on the ground.

Optical cable fittings

Optical cable fittings

Optical cable fittings Description
 
This Fiber Optical Cable Junction Box is designed and developed to meet the requirements of different underground environment for installation. This series of fiber optical splice closures are suitable for the national-level main circuits and other main circuits as well as special regional environment, and they can be directly buried under the ground, the underground of saline-alkali areas, long-term watered manholes and areas gathering lots of termites, with the function of butt-joint, branching and straight-through.

 
Optical cable fittings Features:
 
Advanced internal structure design
Easy and fast to fix fiber cable
Fiber suffers no attenuation
The closure is spacious enough for winding and storing fibers
Fiber Optic Splice Trays(FOSTs) are design in SLIDE-IN- LOCK and its opening angle is about 90°
The curved diameter meets with international standard
Easy and fast to increase and reduce FOSTs
Innovative elastic intergrated seal fitting

Preformed ADSS & OPGW cable

Preformed ADSS & OPGW cable
1.Use:

Preformed ADSS & OPGW cable

Cable storage assembly:Deposit the remainning cable on running pole or tower.Be used with joint box.
Instruction :
1,T——for tower H*——(According To Table 9.2)stainless steel hoop D*——dia of pole .

Name	Model	Dimension		Collocation	Suitable Cable Range
		L(mm)	Weight(kg)
Cable StorageAssembly	TJY 660-T	660	4.1	small splint	The dia.  Of ADSS cable less than 14.8MM
	TJY 1000-T	1000	7.7		14.8MM The dia. Of ADSS/OPGW  cable less than 14.8MM
	TJY 1200-T	1200	11.8		14.8MM The dia. Of OPGW cable  less than 14.8MM
Cable StorageAssembly	TJY 660-H*	660	4.1	Support for pole	14.8MM The dia. Of ADSS cable  less than 14.8MM
	TJY 1000-H*	1000	7.7		14.8MM,, The dia. Of ADSS/OPGW cable  less than 14.8MM
	TJY 1200-D*	1200	11.8	Elbow hoop	14.8mm The dia. Of OPGW cable  less than 14.8MM

Preformed fittings

Preformed fittings

We produce Preformed fittings，if you need our products,you can contact us.
preformed helical suspension clamp take advantage clamp strenth from the preformed armor rod and then make the friction to clench the wire ,so that the product has disperse the strength and can not so easy to damage the wires.

Strain Clamp supplier

Strain Clamp supplier

Strain Clamp supplier
NLL series bolt type aluminum alloy strain clamp is suitable for 35KV or less than overhead circuit, fix aluminum wire or steel-aluminum wire on strain rod, overhead insulation aluminum conductor, it is for mating insulation aluminum cover, it takes insulation protection.

Description:

1,NY strain clamp(Hydraulic type)
2,Material:Aluminium alloy steel with Hot-dip galvanized
3.Supplier:Factory

Features

1,NY strain clamp (Hydraulic type)

2,Material:Aluminium alloy&steel with Hot-dip galvanized

3,Suitable conductor:LG/-240/300/400/500/630

4,standard package export carton or base your desire

5.Many designs and professional technology

6.Good performance and competitive prices

Strain Clamp supplier

Strain Clamp supplier
Connection fitting ,Hot dip galvanized steel parts, to join hardware, used for connecting the fixed power equipment ,
1. Material: Galvanized  Steel
2. Product quality has reached to IEC standard
3. Packing: Standard export seaworthy and plywood case packing or follow buyer's request
4. Delivery: Within 3 weeks after receipt of client's prepayment or L/C.

For opening a new mold then delivery time need undetermined.

Part No.	Applicable Conductor (mm)				Rated  Failure Load  (KN)
		C	M	U bolts
NLL-1	5.0-10.0	18	16	M12*2	40
NLL-2	10.0-14.0	18	16	M12*2	40
NLL-3	14.0-18.0	28	18	M14*3	70
NLL-4	18.0-23.0	34	18	M16*3	90
NLL-27	12.48-21.66	30	18	M16*4	90
NLL-5	23.0-29.0	36	18	M16*5	100
NLL-6	25.9-32.67	40	22	M16*5	100

Guy-grip dead ends

Guy-grip dead ends are designed to hold insulated cables and bare homogeneous cables in transmission and distribution construction. Mechanical strength for these dead-ends are superior to that of homogeneous cables.

But, for steel-core cables the strength is approx the same as the breaking load of the aluminum strands.

This products are manufactured with aluminum covered steel for ACSR and homogeneous conductor, with copper covered steel for copper conductors and galvanized steel for direct application on insulator conductor.

Guy-grip dead ends

These transmission and distribution dead-ends must be used with a clevis thimble and insulators which have smoothly contoured surfaces adequate groove widths and loop diameters.

Product name	preformed guy grip dead end
Size	11.5-12.5mm
Material	Mild steel wire
Finishing	Hot-dip galvanized,stranded,sand blast,Ending treatment
Zinc thickness	more than 86micron
Standard	ISO 1461
MOQ	100PCS
Near Port	wenzhou port

Optical cable fittings

Optical cable fittings

Optical cable fittings Specification
 
1)High quality of the suspension clamp 
2)Stable structure 
3)Certificate: ISO9001
 
4)Prompt quote & Leadtime guarantee
 
The clamp boady and keeper are malleable iron.cotter-pins are made of stainless steel. the other parts are steel.All ferrous parts are hou-dip galvanized

Optical cable fittings Specifications

Clear Connector for MicroDuct
Easy installation
can be connected and disconnected 10 times
System Benefits
l Installation time reduced.
l Locking clips available in order to prevent microducts accidental disconnection.
l Transparent body allows inspection of correct installation of the cable.

l Anti shock cover available in order to prevent damages. It's special design allow inspection of correct installation of the cable also when installed. Locking clip function included.

Strain Clamp supplier China

Strain Clamp supplier China 

Connection fitting ,Hot dip galvanized steel parts, to join hardware, used for connecting the fixed power equipment 

1. Material:Galvanized  Steel

2. Product quality has reached to IEC standard

3. Packing: Standard export seaworthy and plywood case packing or follow buyer's request

4. Delivery: Within 3 weeks after receipt of client's prepayment or L/C.

For opening a new mold then delivery time need undetermined.

Type	Inside Wedge Clamping Range (mm)	Nominal Section of Area Wire (mm2)		Nominal Failure Load (kn)
		JKLYJ-1KV	JKLYJ-10KV
JNE-101	Φ 7~Φ 9.5	16~25	- -	11.5
JNE-102	Φ 9.5~Φ 12.0	35~50	- -
JNE-103	Φ 12.0~Φ 14.0	70	16~25
JNE-104	Φ 12.5~Φ 15.0	- -	35
JNE-205	Φ 14.0~Φ 16.5	95	50	22.0
JNE-206	Φ 15.5~Φ 18.0	120	70
JNE-207	Φ 17.5~Φ 20.0	150	95
JNE-308	Φ 19.0~Φ 21.5	185	120	28.0
JNE-300	Φ 20.5~Φ 23.0	- -	150
JNE-410	Φ 22.0~Φ 24.5	240	185	45.0